Описание

Ultra Small Digital Barcode Reader, Standard Type, Front Raster
Model BL-1301
Type Standard type
Type Reading direction Front
Scanning method Raster
Laser Light source Visible red semiconductor laser (660 nm wavelength)
Control output 85 µW
Pulse duration 112 µs
Laser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)
Reading Supported codes CODE 39, ITF, Industrial 2of5, Standard 2of5, COOP 2of5, NW-7 (Codabar), CODE 128, GS1-128, CODE 93, EAN/UPC, GS1 DataBar
Number of readable digits 74 digits (148 digits with CODE 128 start character C)
Readable bar width 0.125 mm to
Reading distance 65 to 500 mm*2 (1.0 mm narrow bar width)
Focal point 120 mm
Largest readable label width 339 mm*2 (350 mm distance, 1.0 mm narrow bar width)
PCS 0.4 or more
Scanning rate 500 to 1,300 scans/second
I/O specifications Input terminals Number of inputs Two (IN1, IN2)
Input format non-voltage input (contact or solid-state)
Output terminals Number of outputs Four (OUT1 through OUT4)
Output NPN open collector
Rated load 24 VDC, 30 mA
Leakage current (at OFF) 0.1 mA or less
Residual voltage (at ON) 0.5 V or less
Serial interface Communication method Conforms to EIA, RS-232C
Communication speed 600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps
Synchronisation between the transmitter and receiver Asynchronous
Data bit length 7/8 bits
Stop bit length 1/2 bits
Parity check None/Even/Odd
Rating Power voltage 5 VDC ±5 %
Voltage consumption 400 mA or less
Environmental resistance Enclosure rating IP65
Ambient light 10,000 lux (sunlight), 6,000 lux (Incandescent lamp)
Operating environment No dust or corrosive gas present
Ambient temperature 0 to +45 °C
Storage temperature -20 to +60 °C
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Weight Approx. 115 g
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 Specifications for 500-scan/second operation Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. Internal body settings are written in the internal memory area (can be rewritten 100,000 times).
''